page1
DRAWN BY
BALDWIN
7/12/17
TITLE
REV.
FILE NAME
SHEET
V3_dual_40mm 24v Flow Fan Harness
Copyright © 2017 Aleph Objects, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution 4.0 International
Public License (CC BY-SA 4.0).
DATE
CHECKED BY
DRAWN BY
DATE
C
AS-CB0038_TAZ_Dual_Extruder_v3_40mm_
Fan_Harness.odg
1
12
2x [EL-MS0205]
Male Molex Pin
1x [EL-WR0105] – 24awg Black Wire
Length = 55mm
2x [EL-FA0032]
Pelonis FAN 24V 40mmx40mmx10mm Low flow
Length = 45mm
Length = 190mm
Strip 7mm
Strip 7mm
1x [EL-WR0103] – 24awg Red Wire
Length = 55mm
Strip 4mm
Strip 4mm
Strip 7mm
Strip 7mm
NOTE:
1) All Components are ROHS Compliant
2) Unless Otherwise Noted Tolerances Are:
Decimals Angles
.X ± .75 X° ± 1°
.XX ± .25
.XXX ± .125
.XXXX ± .050
2x [EL-MS0416]
⌀2.7mm Solder Sleeve
Rev
Date
Changes
Changed by
IR
7/12/17
Initial release
A
9/27/17
Changed length to 200mm for wire routing change
Kent
B
10/2/17
Changed length to 190 for wire routing
Kent
C
10/4/17
Changed length on molex pin side from 85mm to 55mm
Kent
West
7/12/17
AS-CB0038