page1
DRAWN BY
JW
04/04/18
TITLE
REV.
FILE NAME
SHEET
TAZ Workhorse, CB Bed Harness
Copyright © 2019 Aleph Objects, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution 4.0 International
Public License (CC BY-SA 4.0).
DATE
CHECKED BY
DRAWN BY
DATE
A
1
Pin 3
Pin 4
5x Female Molex Pin
[EL-MS0059]
All wires this side
Strip 4mm
Pin 2
Pin 1
1x [EL-WR0103] – 24awg Red Wire
1x Term Ring Non Ins 26-22AWG
[EL-MS0141]
Pin 2
Strip 8mm
2x [EL-WR0109] – 24awg Yellow Wire
Length = 280mm
Pin 1
1x [EL-WR0103] – 24awg Red Wire
Length = 270mm
1x Female 2pin
Housing
[PC-CN0001]
Strip 4mm
Length = 110mm
3x Female Molex Pin
[EL-MS0059]
1x TVS Diode – 1500W, 5V
[EL-MS0329]
1x Solder sleeve
[EL-MS0416]
Pin 1
1x Female 3pin
Housing
[PC-CN0003]
Strip 4mm
EL-HR0184_CB_Bed_harness_revA.odg
EL-HR0184
55mm
Strip 4mm
[EL-MS0540]
Ferrite Core
277 OHM Hinged
1x [EL-MS0247]
BLACK Shrink Tubing
55mm
50mm
1x Female 6pin Housing
[PC-CN0118]
1x Term Ring Non Ins 26-22AWG
[EL-MS0141]
Pin 6
1x [EL-WR0105] – 24awg Black Wire
Length = 160mm
Strip 4mm
Notes: Unless otherwise specified
Cut length +/- 3mm
Molex strip length +/-0.5mm
Ring terminal strip length +/-0.5mm
Initial
comments
date
Rev
JW
Change name from redgum to workhorse
7/3/19
A