page1
DRAWN BY
JW
04/04/18
TITLE
REV.
FILE NAME
SHEET
CB Bed Harness, Assembled
Copyright © 2018 Aleph Objects, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution 4.0 International
Public License (CC BY-SA 4.0).
DATE
CHECKED BY
DRAWN BY
DATE
D
1
Pin 3
Pin 4
5x Female Molex Pin
[EL-MS0059]
All wires this side
Strip 4mm
Pin 2
Pin 1
1x [EL-WR0103] – 24awg Red Wire
1x Term Ring Non Ins 26-22AWG
[EL-MS0141]
Pin 2
Strip 8mm
2x [EL-WR0109] – 24awg Yellow Wire
Length = 280mm
Pin 1
1x [EL-WR0103] – 24awg Red Wire
Length = 270mm
1x Female 2pin
Housing
[PC-CN0001]
Strip 4mm
Length = 110mm
3x Female Molex Pin
[EL-MS0059]
1x TVS Diode – 1500W, 5V
[EL-MS0329]
1x Solder sleeve
[EL-MS0416]
Pin 1
1x Female 3pin
Housing
[PC-CN0003]
Strip 4mm
EL-HR0155_CB_Bed_harness.odg
EL-HR0155
55mm
Strip 4mm
Rev
Date
Changes
Change By
A
1/7/19
Add heat shrink tubing and ferrite to thermistor and probe wires
JW
B
1/25/19
Add ground wire
KJ
C
1/30/19
Add strip length for ground wire
JW
D
1/30/19
Add strip tolerance
JW
[EL-MS0540]
Ferrite Core
277 OHM Hinged
1x [EL-MS0247]
BLACK Shrink Tubing
55mm
25mm
1x Female 6pin Housing
[PC-CN0118]
1x Term Ring Non Ins 26-22AWG
[EL-MS0141]
Pin 6
1x [EL-WR0105] – 24awg Black Wire
Length = 160mm
Strip 4mm
Notes: Unless otherwise specified
Cut length +- 3mm
Molex strip length +-0.5mm
Ring terminal strip length +-0.5mm