page1
DRAWN BY
Josh W
TITLE
REV.
FILE NAME
SHEET
Bed Extension Harness, Assembled
Copyright © 2018 Aleph Objects, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution 4.0 International
Public License (CC BY-SA 4.0).
DATE
CHECKED BY
DRAWN BY
DATE
C
1
1x [PC-CN0050]
Male 3pin Housing
3x [EL-MS0205]
Male Molex Pin
Pin 1
Pin 2
Length = 110mm
3x [EL-MS0141]
Term Ring Non Ins 26-22AWG
Strip 4mm
Cut Length tolerance is +/- 2mm, all wires
2x [EL-WR0119]
24 AWG Stranded Wire- green
EL-HR0146
EL-HR0146_Bed_Extension_
Harness_revC.odg
Strip 6mm
1x TVS Diode – 1500W, 5V
[EL-MS0329]
(note direction of diode)
1x Solder sleeve
[EL-MS0416]
Pin 3
55mm
Length = 55mm
1x [EL-WR0105] 24AWG Stranded- Black
Heat Shrink Tubing
[EL-MS0247]
85mm
85mm
Rev
Date
Changes
Change By
A
12/27/18
Add TVS diode ground to harness
JW
B
1/30/19
Add strip tolerance
JW
C
3/28/19
Update ao pn on bom from el-ms0105 to el-wr0105
JW
Strip this end of black wire 8mm
Notes: Unless otherwise specified
Cut length +/- 3mm
Molex strip length +/-0.5mm
Ring terminal strip length +/-0.5mm
Solder sleeve strip length +/- 1mm