arm_q7_to_q15.c
Go to the documentation of this file.
00001 /* ---------------------------------------------------------------------------- 00002 * Copyright (C) 2010 ARM Limited. All rights reserved. 00003 * 00004 * $Date: 15. July 2011 00005 * $Revision: V1.0.10 00006 * 00007 * Project: CMSIS DSP Library 00008 * Title: arm_q7_to_q15.c 00009 * 00010 * Description: Converts the elements of the Q7 vector to Q15 vector. 00011 * 00012 * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 00013 * 00014 * Version 1.0.10 2011/7/15 00015 * Big Endian support added and Merged M0 and M3/M4 Source code. 00016 * 00017 * Version 1.0.3 2010/11/29 00018 * Re-organized the CMSIS folders and updated documentation. 00019 * 00020 * Version 1.0.2 2010/11/11 00021 * Documentation updated. 00022 * 00023 * Version 1.0.1 2010/10/05 00024 * Production release and review comments incorporated. 00025 * 00026 * Version 1.0.0 2010/09/20 00027 * Production release and review comments incorporated. 00028 * ---------------------------------------------------------------------------- */ 00029 00030 #include "arm_math.h" 00031 00062 void arm_q7_to_q15( 00063 q7_t * pSrc, 00064 q15_t * pDst, 00065 uint32_t blockSize) 00066 { 00067 q7_t *pIn = pSrc; /* Src pointer */ 00068 uint32_t blkCnt; /* loop counter */ 00069 00070 #ifndef ARM_MATH_CM0 00071 00072 /* Run the below code for Cortex-M4 and Cortex-M3 */ 00073 00074 /*loop Unrolling */ 00075 blkCnt = blockSize >> 2u; 00076 00077 /* First part of the processing with loop unrolling. Compute 4 outputs at a time. 00078 ** a second loop below computes the remaining 1 to 3 samples. */ 00079 while(blkCnt > 0u) 00080 { 00081 /* C = (q15_t) A << 8 */ 00082 /* convert from q7 to q15 and then store the results in the destination buffer */ 00083 *pDst++ = (q15_t) * pIn++ << 8; 00084 *pDst++ = (q15_t) * pIn++ << 8; 00085 *pDst++ = (q15_t) * pIn++ << 8; 00086 *pDst++ = (q15_t) * pIn++ << 8; 00087 00088 /* Decrement the loop counter */ 00089 blkCnt--; 00090 } 00091 00092 /* If the blockSize is not a multiple of 4, compute any remaining output samples here. 00093 ** No loop unrolling is used. */ 00094 blkCnt = blockSize % 0x4u; 00095 00096 #else 00097 00098 /* Run the below code for Cortex-M0 */ 00099 00100 /* Loop over blockSize number of values */ 00101 blkCnt = blockSize; 00102 00103 #endif /* #ifndef ARM_MATH_CM0 */ 00104 00105 while(blkCnt > 0u) 00106 { 00107 /* C = (q15_t) A << 8 */ 00108 /* convert from q7 to q15 and then store the results in the destination buffer */ 00109 *pDst++ = (q15_t) * pIn++ << 8; 00110 00111 /* Decrement the loop counter */ 00112 blkCnt--; 00113 } 00114 00115 } 00116
