page1
DRAWN BY
Bob B.
06/02/2016
TITLE
REV.
FILE NAME
SHEET
TAZ6 CB Bed Harness
Copyright © 2016 Aleph Objects, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the Creative Commons Attribution 4.0 International
Public License (CC BY-SA 4.0).
EL-HR0081
DATE
CHECKED BY
DRAWN BY
DATE
B
TAZ6_CB_Bed_Harness_revB.odg
1
Pin 8
Pin 9
1x Female 10pin Housing
[PC-CN0060]
10x Female Molex Pin
[EL-MS0059]
All wires this side
Strip 4mm
Pin 2
Pin 1
1x Ferrite
[EL-MS0344]
1x Heat Shrink Tubing
[EL-MS0259]
55mm
1x [EL-WR0103] – 24awg Red Wire
1x Term Ring Non Ins 26-22AWG
[EL-MS0141]
Pin 10
-- 70mm ---
Strip 8mm
2x [EL-WR0109] – 24awg Yellow Wire
Length = 260mm
1x Female 3pin Housing
[PC-CN0003]
2x [EL-WR0119] – 24awg Green Wire
Pin 1
Strip 4mm
Length = 250mm
Pin 2
Pin 2
Pin 1
1x Female 3pin Housing
[PC-CN0003]
Pin 3
1x [EL-WR0103] – 24awg Red Wire
Length = 250mm
Strip 4mm
Female Molex Pin
[EL-MS0059]
2x [EL-WR0111] – 24awg Blue Wire
Pin 6
Pin 7
Length = 250mm
2x [EL-WR0104] – 24awg Orange Wire
Pin 4
Pin 5
Length = 250mm
1x Female 2pin Housing
[PC-CN0001]
Pin 2
Pin 1
Pin 2
Pin 1
1x Female 3pin Housing
[PC-CN0003]
Strip 4mm
Strip 4mm
Strip 4mm
Length = 150mm
9x Female Molex Pin
[EL-MS0059]
1x Ferrule
[EL-MS0360]
1x TVS Diode – 1500W, 5V
[EL-MS0329]
1x Heat Shrink Tubing
[EL-MS0247]
70mm
NOTE:
Install ferrite this side
BEFORE inserting pins into
Housing on this side of harness
2x [HD-MS0058]
Wire Tie, 8" Black
Secure ferrite into position with
One tie wrap at each end of ferrite.
Slide shrink tubing over and
Shrink with medium heat.
Mic
06/02/2016