Readme File for Printed Circuit Board 'EinsyRetroPanel_0.1c'

Board Specification
Part Number            EinsyRetro
Revision               0.1c
Board size             105 x 71mm
Board Thickness        1.524mm (0.06")
Board type             Rigid
Number of layers       6
P.C.B material         RoHS TG170
Finished Copper        2oz, 1oz (See Stackup)
Finish                 ENIG (Gold) (Lead free) (RoHS)
Mask type              See special requirement below
Mask color             Green
Silk screen color      White
Silk screen Sides      BOTH 
Min trace width        0.006"
Min clearance          0.008"
Min Hole Diameter >=   10mil
Gold Edge Connectors   No
Internal slots/routes  0
Blind Vias             No
Buried Vias            No
No of Boards/Panel     3
Routing                V-Score
Panel Size     116.8 X 226.1mm

Drill format           Leading zero suppression 2.4

Special Requirements
1. Fabricate PCB in accordiance with IPC-A-600 CLASS 2 (LATEST REVISION)
2. The PCB must be lead free assembly process compatible.
  Must handle minimum 6 cycles - 260C for 10 seconds.
3. Please ship panels including rails with tooling holes and fiducials in gerber files.
4.UL LOGO + ID and ROHS logo to be placed on solder side (bottom silk screen) by board fab in regions .

Critical Tolerances: None

Layer Description
(Note: Inner layers are counted from the top downwards)
Top Paste                     Einsy Retro_0.1c.GTP
Top Silk Screen               Einsy Retro_0.1c.GTO
Top Solder Mask               Einsy Retro_0.1c.GTS
Top Copper                    Einsy Retro_0.1c.GTL
Inner Plane 1                 Einsy Retro_0.1c.GP1
Inner Signal 1                Einsy Retro_0.1c.G1
Inner Signal 2                Einsy Retro_0.1c.G2
Inner Signal 3                Einsy Retro_0.1c.G3
Bottom Copper                 Einsy Retro_0.1c.GBL
Bottom Solder Mask            Einsy Retro_0.1c.GBS
Bottom Silk Screen            Einsy Retro_0.1c.GBO
NC Drill File                 Einsy Retro_0.1c.TXT
Panel                         Einsy Retro_0.1c.GM1
Fabrication Notes             Einsy Retro_0.1c.GM2
UL Logo Placement             Einsy Retro_0.1c.GM29
Panel Dimension               Einsy Retro_0.1c.GM30
V-Score                       Einsy Retro_0.1c.GM31
Panel Outline                 Einsy Retro_0.1c.GM32
IPC-D-356 Netlist             Einsy Retro_0.1c IPC-D-356.net
Stackup                       Stack up.jpg

Contact Information
Address
Company        UltiMachine
Address        200 12th St. N.
City           South Pittsburg
State          TN
PostCode       37380
Country        USA
Email          info@ultimachine.com
Phone          423-228-0005

Purchasing contact:
Lee Turner - lee@ultimachine.com

Technical contacts:
Aaron Shepard - aaron@ultimachine.com 
Johnny Russell - johnny@ultimachine.com