Mini X Carriage Assembly Workflow

Tools

Gather tools and components for assembly

Components Required

X carriage
Upper bearing holder
Male cable guide connector
M3x12 SHCS
M3x6 Flat head
M3 washer

Tools

2.5 mm Allen driver
2 mm Allen driver

Are all the tools and components gathered?

Upper bearing holder, cable guide and hardware

Cable guide attached, note orientation

Attach male cable guide to upper bearing holder

Attach the male cable guide connector to the upper bearing holder using 2x M3x6 flat head screws as shown.

Is the cable oriented correctly?

Note orientation

Attached view other side

Attach upper bearing holder to X carriage

Make sure bearings are flush with the holder and X-carriage.

Attach the upper bearing holder to the X carriage using 4x M3x12 SHCS with M3 washers as shown, leave the screws a little loose, they will get tightened down later.

Is the bearing holder oriented correctly and the screws loose?

Components

View from other side

Complete, note orientation

Attach belt mount

Attach the belt mount to the side with the bearing on it using 3x M3x12 SHCS with M3 washers as shown.

Are the parts oriented correctly?
Complete

You're done!