package Slic3r::GUI::Plater;
use strict;
use warnings;
use utf8;

use File::Basename qw(basename dirname);
use List::Util qw(sum first);
use Slic3r::Geometry qw(X Y Z MIN MAX scale unscale deg2rad);
use threads::shared qw(shared_clone);
use Wx qw(:button :cursor :dialog :filedialog :keycode :icon :font :id :listctrl :misc 
    :panel :sizer :toolbar :window wxTheApp :notebook);
use Wx::Event qw(EVT_BUTTON EVT_COMMAND EVT_KEY_DOWN EVT_LIST_ITEM_ACTIVATED 
    EVT_LIST_ITEM_DESELECTED EVT_LIST_ITEM_SELECTED EVT_MOUSE_EVENTS EVT_PAINT EVT_TOOL 
    EVT_CHOICE EVT_TIMER);
use base 'Wx::Panel';

use constant TB_ADD             => &Wx::NewId;
use constant TB_REMOVE          => &Wx::NewId;
use constant TB_RESET           => &Wx::NewId;
use constant TB_ARRANGE         => &Wx::NewId;
use constant TB_EXPORT_GCODE    => &Wx::NewId;
use constant TB_EXPORT_STL      => &Wx::NewId;
use constant TB_MORE    => &Wx::NewId;
use constant TB_FEWER   => &Wx::NewId;
use constant TB_45CW    => &Wx::NewId;
use constant TB_45CCW   => &Wx::NewId;
use constant TB_SCALE   => &Wx::NewId;
use constant TB_SPLIT   => &Wx::NewId;
use constant TB_CUT     => &Wx::NewId;
use constant TB_SETTINGS => &Wx::NewId;
use constant CONFIG_TIMER_ID => &Wx::NewId;

# package variables to avoid passing lexicals to threads
our $THUMBNAIL_DONE_EVENT    : shared = Wx::NewEventType;
our $PROGRESS_BAR_EVENT      : shared = Wx::NewEventType;
our $ERROR_EVENT             : shared = Wx::NewEventType;
our $EXPORT_COMPLETED_EVENT  : shared = Wx::NewEventType;
our $PROCESS_COMPLETED_EVENT : shared = Wx::NewEventType;

use constant FILAMENT_CHOOSERS_SPACING => 3;
use constant PROCESS_DELAY => 0.5 * 1000; # milliseconds

my $PreventListEvents = 0;

sub new {
    my $class = shift;
    my ($parent) = @_;
    my $self = $class->SUPER::new($parent, -1, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL);
    $self->{config} = Slic3r::Config->new_from_defaults(qw(
        bed_shape complete_objects extruder_clearance_radius skirts skirt_distance brim_width
        octoprint_host octoprint_apikey
    ));
    $self->{model} = Slic3r::Model->new;
    $self->{print} = Slic3r::Print->new;
    $self->{objects} = [];
    $self->{apply_config_timer} = Wx::Timer->new($self, CONFIG_TIMER_ID)
        if $Slic3r::have_threads;
    
    $self->{print}->set_status_cb(sub {
        my ($percent, $message) = @_;
        
        if ($Slic3r::have_threads) {
            Wx::PostEvent($self, Wx::PlThreadEvent->new(-1, $PROGRESS_BAR_EVENT, shared_clone([$percent, $message])));
        } else {
            $self->on_progress_event($percent, $message);
        }
    });
    
    # Initialize preview notebook
    $self->{preview_notebook} = Wx::Notebook->new($self, -1, wxDefaultPosition, [335,335], wxNB_BOTTOM);
    
    # Initialize handlers for canvases
    my $on_select_object = sub {
        my ($obj_idx) = @_;
        $self->select_object($obj_idx);
    };
    my $on_double_click = sub {
        $self->object_settings_dialog if $self->selected_object;
    };
    my $on_right_click = sub {
        my ($canvas, $click_pos) = @_;
        
        my ($obj_idx, $object) = $self->selected_object;
        return if !defined $obj_idx;
        
        my $menu = $self->object_menu;
        $canvas->PopupMenu($menu, $click_pos);
        $menu->Destroy;
    };
    my $on_instance_moved = sub {
        my ($obj_idx, $instance_idx) = @_;
        $self->update;
    };
    
    # Initialize 2D preview canvas
    $self->{canvas} = Slic3r::GUI::Plater::2D->new($self->{preview_notebook}, wxDefaultSize, $self->{objects}, $self->{model}, $self->{config});
    $self->{preview_notebook}->AddPage($self->{canvas}, '2D');
    $self->{canvas}->on_select_object($on_select_object);
    $self->{canvas}->on_double_click($on_double_click);
    $self->{canvas}->on_right_click(sub { $on_right_click->($self->{canvas}, @_); });
    $self->{canvas}->on_instance_moved($on_instance_moved);
    
    # Initialize 3D preview and toolpaths preview
    if ($Slic3r::GUI::have_OpenGL) {
        $self->{canvas3D} = Slic3r::GUI::Plater::3D->new($self->{preview_notebook}, $self->{objects}, $self->{model}, $self->{config});
        $self->{preview_notebook}->AddPage($self->{canvas3D}, '3D');
        $self->{canvas3D}->set_on_select_object($on_select_object);
        $self->{canvas3D}->set_on_double_click($on_double_click);
        $self->{canvas3D}->set_on_right_click(sub { $on_right_click->($self->{canvas3D}, @_); });
        $self->{canvas3D}->set_on_instance_moved($on_instance_moved);
        
        $self->{toolpaths2D} = Slic3r::GUI::Plater::2DToolpaths->new($self->{preview_notebook}, $self->{print});
        $self->{preview_notebook}->AddPage($self->{toolpaths2D}, 'Preview');
    }
    
    # toolbar for object manipulation
    if (!&Wx::wxMSW) {
        Wx::ToolTip::Enable(1);
        $self->{htoolbar} = Wx::ToolBar->new($self, -1, wxDefaultPosition, wxDefaultSize, wxTB_HORIZONTAL | wxTB_TEXT | wxBORDER_SIMPLE | wxTAB_TRAVERSAL);
        $self->{htoolbar}->AddTool(TB_ADD, "Add…", Wx::Bitmap->new("$Slic3r::var/brick_add.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_REMOVE, "Delete", Wx::Bitmap->new("$Slic3r::var/brick_delete.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_RESET, "Delete All", Wx::Bitmap->new("$Slic3r::var/cross.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_ARRANGE, "Arrange", Wx::Bitmap->new("$Slic3r::var/bricks.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddSeparator;
        $self->{htoolbar}->AddTool(TB_MORE, "More", Wx::Bitmap->new("$Slic3r::var/add.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_FEWER, "Fewer", Wx::Bitmap->new("$Slic3r::var/delete.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddSeparator;
        $self->{htoolbar}->AddTool(TB_45CCW, "45° ccw", Wx::Bitmap->new("$Slic3r::var/arrow_rotate_anticlockwise.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_45CW, "45° cw", Wx::Bitmap->new("$Slic3r::var/arrow_rotate_clockwise.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_SCALE, "Scale…", Wx::Bitmap->new("$Slic3r::var/arrow_out.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_SPLIT, "Split", Wx::Bitmap->new("$Slic3r::var/shape_ungroup.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddTool(TB_CUT, "Cut…", Wx::Bitmap->new("$Slic3r::var/package.png", wxBITMAP_TYPE_PNG), '');
        $self->{htoolbar}->AddSeparator;
        $self->{htoolbar}->AddTool(TB_SETTINGS, "Settings…", Wx::Bitmap->new("$Slic3r::var/cog.png", wxBITMAP_TYPE_PNG), '');
    } else {
        my %tbar_buttons = (
            add             => "Add…",
            remove          => "Delete",
            reset           => "Delete All",
            arrange         => "Arrange",
            increase        => "",
            decrease        => "",
            rotate45ccw     => "",
            rotate45cw      => "",
            changescale     => "Scale…",
            split           => "Split",
            cut             => "Cut…",
            settings        => "Settings…",
        );
        $self->{btoolbar} = Wx::BoxSizer->new(wxHORIZONTAL);
        for (qw(add remove reset arrange increase decrease rotate45ccw rotate45cw changescale split cut settings)) {
            $self->{"btn_$_"} = Wx::Button->new($self, -1, $tbar_buttons{$_}, wxDefaultPosition, wxDefaultSize, wxBU_EXACTFIT);
            $self->{btoolbar}->Add($self->{"btn_$_"});
        }
    }

    $self->{list} = Wx::ListView->new($self, -1, wxDefaultPosition, wxDefaultSize,
        wxLC_SINGLE_SEL | wxLC_REPORT | wxBORDER_SUNKEN | wxTAB_TRAVERSAL | wxWANTS_CHARS );
    $self->{list}->InsertColumn(0, "Name", wxLIST_FORMAT_LEFT, 145);
    $self->{list}->InsertColumn(1, "Copies", wxLIST_FORMAT_CENTER, 45);
    $self->{list}->InsertColumn(2, "Scale", wxLIST_FORMAT_CENTER, wxLIST_AUTOSIZE_USEHEADER);
    EVT_LIST_ITEM_SELECTED($self, $self->{list}, \&list_item_selected);
    EVT_LIST_ITEM_DESELECTED($self, $self->{list}, \&list_item_deselected);
    EVT_LIST_ITEM_ACTIVATED($self, $self->{list}, \&list_item_activated);
    EVT_KEY_DOWN($self->{list}, sub {
        my ($list, $event) = @_;
        if ($event->GetKeyCode == WXK_TAB) {
            $list->Navigate($event->ShiftDown ? &Wx::wxNavigateBackward : &Wx::wxNavigateForward);
        } else {
            $event->Skip;
        }
    });
    
    # right pane buttons
    $self->{btn_export_gcode} = Wx::Button->new($self, -1, "Export G-code…", wxDefaultPosition, [-1, 30], wxBU_LEFT);
    $self->{btn_send_gcode} = Wx::Button->new($self, -1, "Send to printer", wxDefaultPosition, [-1, 30], wxBU_LEFT);
    $self->{btn_export_stl} = Wx::Button->new($self, -1, "Export STL…", wxDefaultPosition, [-1, 30], wxBU_LEFT);
    #$self->{btn_export_gcode}->SetFont($Slic3r::GUI::small_font);
    #$self->{btn_export_stl}->SetFont($Slic3r::GUI::small_font);
    $self->{btn_send_gcode}->Hide;
    
    if ($Slic3r::GUI::have_button_icons) {
        my %icons = qw(
            add             brick_add.png
            remove          brick_delete.png
            reset           cross.png
            arrange         bricks.png
            export_gcode    cog_go.png
            send_gcode      arrow_up.png
            export_stl      brick_go.png
            
            increase        add.png
            decrease        delete.png
            rotate45cw      arrow_rotate_clockwise.png
            rotate45ccw     arrow_rotate_anticlockwise.png
            changescale     arrow_out.png
            split           shape_ungroup.png
            cut             package.png
            settings        cog.png
        );
        for (grep $self->{"btn_$_"}, keys %icons) {
            $self->{"btn_$_"}->SetBitmap(Wx::Bitmap->new("$Slic3r::var/$icons{$_}", wxBITMAP_TYPE_PNG));
        }
    }
    $self->selection_changed(0);
    $self->object_list_changed;
    EVT_BUTTON($self, $self->{btn_export_gcode}, sub {
        $self->export_gcode;
        Slic3r::thread_cleanup();
    });
    EVT_BUTTON($self, $self->{btn_send_gcode}, sub {
        $self->{send_gcode_file} = $self->export_gcode(Wx::StandardPaths::Get->GetTempDir());
        Slic3r::thread_cleanup();
    });
    EVT_BUTTON($self, $self->{btn_export_stl}, \&export_stl);
    
    if ($self->{htoolbar}) {
        EVT_TOOL($self, TB_ADD, sub { $self->add; });
        EVT_TOOL($self, TB_REMOVE, sub { $self->remove() }); # explicitly pass no argument to remove
        EVT_TOOL($self, TB_RESET, sub { $self->reset; });
        EVT_TOOL($self, TB_ARRANGE, sub { $self->arrange; });
        EVT_TOOL($self, TB_MORE, sub { $self->increase; });
        EVT_TOOL($self, TB_FEWER, sub { $self->decrease; });
        EVT_TOOL($self, TB_45CW, sub { $_[0]->rotate(-45) });
        EVT_TOOL($self, TB_45CCW, sub { $_[0]->rotate(45) });
        EVT_TOOL($self, TB_SCALE, sub { $self->changescale(undef); });
        EVT_TOOL($self, TB_SPLIT, sub { $self->split_object; });
        EVT_TOOL($self, TB_CUT, sub { $_[0]->object_cut_dialog });
        EVT_TOOL($self, TB_SETTINGS, sub { $_[0]->object_settings_dialog });
    } else {
        EVT_BUTTON($self, $self->{btn_add}, sub { $self->add; });
        EVT_BUTTON($self, $self->{btn_remove}, sub { $self->remove() }); # explicitly pass no argument to remove
        EVT_BUTTON($self, $self->{btn_reset}, sub { $self->reset; });
        EVT_BUTTON($self, $self->{btn_arrange}, sub { $self->arrange; });
        EVT_BUTTON($self, $self->{btn_increase}, sub { $self->increase; });
        EVT_BUTTON($self, $self->{btn_decrease}, sub { $self->decrease; });
        EVT_BUTTON($self, $self->{btn_rotate45cw}, sub { $_[0]->rotate(-45) });
        EVT_BUTTON($self, $self->{btn_rotate45ccw}, sub { $_[0]->rotate(45) });
        EVT_BUTTON($self, $self->{btn_changescale}, sub { $self->changescale(undef); });
        EVT_BUTTON($self, $self->{btn_split}, sub { $self->split_object; });
        EVT_BUTTON($self, $self->{btn_cut}, sub { $_[0]->object_cut_dialog });
        EVT_BUTTON($self, $self->{btn_settings}, sub { $_[0]->object_settings_dialog });
    }
    
    $_->SetDropTarget(Slic3r::GUI::Plater::DropTarget->new($self))
        for grep defined($_), $self, $self->{canvas}, $self->{canvas3D}, $self->{list};
    
    EVT_COMMAND($self, -1, $THUMBNAIL_DONE_EVENT, sub {
        my ($self, $event) = @_;
        my ($obj_idx) = @{$event->GetData};
        return if !$self->{objects}[$obj_idx];  # object was deleted before thumbnail generation completed
        
        $self->on_thumbnail_made($obj_idx);
    });
    
    EVT_COMMAND($self, -1, $PROGRESS_BAR_EVENT, sub {
        my ($self, $event) = @_;
        my ($percent, $message) = @{$event->GetData};
        $self->on_progress_event($percent, $message);
    });
    
    EVT_COMMAND($self, -1, $ERROR_EVENT, sub {
        my ($self, $event) = @_;
        Slic3r::GUI::show_error($self, @{$event->GetData});
    });
    
    EVT_COMMAND($self, -1, $EXPORT_COMPLETED_EVENT, sub {
        my ($self, $event) = @_;
        $self->on_export_completed($event->GetData);
    });
    
    EVT_COMMAND($self, -1, $PROCESS_COMPLETED_EVENT, sub {
        my ($self, $event) = @_;
        $self->on_process_completed($event->GetData);
        Slic3r::thread_cleanup();
    });
    
    EVT_TIMER($self, CONFIG_TIMER_ID, sub {
        my ($self, $event) = @_;
        $self->async_apply_config;
    });
    
    $self->{canvas}->update_bed_size;
    if ($self->{canvas3D}) {
        $self->{canvas3D}->update_bed_size;
        $self->{canvas3D}->zoom_to_bed;
    }
    $self->update;
    
    {
        my $presets;
        if ($self->GetFrame->{mode} eq 'expert') {
            $presets = $self->{presets_sizer} = Wx::FlexGridSizer->new(3, 2, 1, 2);
            $presets->AddGrowableCol(1, 1);
            $presets->SetFlexibleDirection(wxHORIZONTAL);
            my %group_labels = (
                print       => 'Print settings',
                filament    => 'Filament',
                printer     => 'Printer',
            );
            $self->{preset_choosers} = {};
            for my $group (qw(print filament printer)) {
                my $text = Wx::StaticText->new($self, -1, "$group_labels{$group}:", wxDefaultPosition, wxDefaultSize, wxALIGN_RIGHT);
                $text->SetFont($Slic3r::GUI::small_font);
                my $choice = Wx::Choice->new($self, -1, wxDefaultPosition, wxDefaultSize, []);
                $choice->SetFont($Slic3r::GUI::small_font);
                $self->{preset_choosers}{$group} = [$choice];
                EVT_CHOICE($choice, $choice, sub { $self->_on_select_preset($group, @_) });
                $presets->Add($text, 0, wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
                $presets->Add($choice, 1, wxALIGN_CENTER_VERTICAL | wxEXPAND | wxBOTTOM, 8);
            }
        }
        
        my $object_info_sizer;
        {
            my $box = Wx::StaticBox->new($self, -1, "Info");
            $object_info_sizer = Wx::StaticBoxSizer->new($box, wxVERTICAL);
            $object_info_sizer->SetMinSize([350,-1]);
            my $grid_sizer = Wx::FlexGridSizer->new(3, 4, 5, 5);
            $grid_sizer->SetFlexibleDirection(wxHORIZONTAL);
            $grid_sizer->AddGrowableCol(1, 1);
            $grid_sizer->AddGrowableCol(3, 1);
            $object_info_sizer->Add($grid_sizer, 0, wxEXPAND);
            
            my @info = (
                size        => "Size",
                volume      => "Volume",
                facets      => "Facets",
                materials   => "Materials",
                manifold    => "Manifold",
            );
            while (my $field = shift @info) {
                my $label = shift @info;
                my $text = Wx::StaticText->new($self, -1, "$label:", wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
                $text->SetFont($Slic3r::GUI::small_font);
                $grid_sizer->Add($text, 0);
                
                $self->{"object_info_$field"} = Wx::StaticText->new($self, -1, "", wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
                $self->{"object_info_$field"}->SetFont($Slic3r::GUI::small_font);
                if ($field eq 'manifold') {
                    $self->{object_info_manifold_warning_icon} = Wx::StaticBitmap->new($self, -1, Wx::Bitmap->new("$Slic3r::var/error.png", wxBITMAP_TYPE_PNG));
                    $self->{object_info_manifold_warning_icon}->Hide;
                    
                    my $h_sizer = Wx::BoxSizer->new(wxHORIZONTAL);
                    $h_sizer->Add($self->{object_info_manifold_warning_icon}, 0);
                    $h_sizer->Add($self->{"object_info_$field"}, 0);
                    $grid_sizer->Add($h_sizer, 0, wxEXPAND);
                } else {
                    $grid_sizer->Add($self->{"object_info_$field"}, 0);
                }
            }
        }
        
        my $buttons_sizer = Wx::BoxSizer->new(wxHORIZONTAL);
        $buttons_sizer->AddStretchSpacer(1);
        $buttons_sizer->Add($self->{btn_export_stl}, 0, wxALIGN_RIGHT, 0);
        $buttons_sizer->Add($self->{btn_send_gcode}, 0, wxALIGN_RIGHT, 0);
        $buttons_sizer->Add($self->{btn_export_gcode}, 0, wxALIGN_RIGHT, 0);
        
        my $right_sizer = Wx::BoxSizer->new(wxVERTICAL);
        $right_sizer->Add($presets, 0, wxEXPAND | wxTOP, 10) if defined $presets;
        $right_sizer->Add($buttons_sizer, 0, wxEXPAND | wxBOTTOM, 5);
        $right_sizer->Add($self->{list}, 1, wxEXPAND, 5);
        $right_sizer->Add($object_info_sizer, 0, wxEXPAND, 0);
        
        my $hsizer = Wx::BoxSizer->new(wxHORIZONTAL);
        $hsizer->Add($self->{preview_notebook}, 1, wxEXPAND | wxTOP, 1);
        $hsizer->Add($right_sizer, 0, wxEXPAND | wxLEFT | wxRIGHT, 3);
        
        my $sizer = Wx::BoxSizer->new(wxVERTICAL);
        $sizer->Add($self->{htoolbar}, 0, wxEXPAND, 0) if $self->{htoolbar};
        $sizer->Add($self->{btoolbar}, 0, wxEXPAND, 0) if $self->{btoolbar};
        $sizer->Add($hsizer, 1, wxEXPAND, 0);
        
        $sizer->SetSizeHints($self);
        $self->SetSizer($sizer);
    }
    
    return $self;
}

# sets the callback
sub on_select_preset {
    my ($self, $cb) = @_;
    $self->{on_select_preset} = $cb;
}

sub _on_select_preset {
	my $self = shift;
	my ($group, $choice) = @_;
	
	# if user changed filament preset, don't propagate this to the tabs
	if ($group eq 'filament' && @{$self->{preset_choosers}{filament}} > 1) {
		my @filament_presets = $self->filament_presets;
		$Slic3r::GUI::Settings->{presets}{filament} = $choice->GetString($filament_presets[0]) . ".ini";
		$Slic3r::GUI::Settings->{presets}{"filament_${_}"} = $choice->GetString($filament_presets[$_])
			for 1 .. $#filament_presets;
		wxTheApp->save_settings;
		return;
	}
	$self->{on_select_preset}->($group, $choice->GetSelection)
	    if $self->{on_select_preset};
	
	# get new config and generate on_config_change() event for updating plater and other things
	$self->on_config_change($self->GetFrame->config);
}

sub GetFrame {
    my ($self) = @_;
    return &Wx::GetTopLevelParent($self);
}

sub update_presets {
    my $self = shift;
    my ($group, $items, $selected) = @_;
    
    foreach my $choice (@{ $self->{preset_choosers}{$group} }) {
        my $sel = $choice->GetSelection;
        $choice->Clear;
        $choice->Append($_) for @$items;
        $choice->SetSelection($sel) if $sel <= $#$items;
    }
    $self->{preset_choosers}{$group}[0]->SetSelection($selected);
}

sub filament_presets {
    my $self = shift;
    
    return map $_->GetSelection, @{ $self->{preset_choosers}{filament} };
}

sub add {
    my $self = shift;
    
    my @input_files = wxTheApp->open_model($self);
    $self->load_file($_) for @input_files;
}

sub load_file {
    my $self = shift;
    my ($input_file) = @_;
    
    $Slic3r::GUI::Settings->{recent}{skein_directory} = dirname($input_file);
    wxTheApp->save_settings;
    
    my $process_dialog = Wx::ProgressDialog->new('Loading…', "Processing input file…", 100, $self, 0);
    $process_dialog->Pulse;
    
    local $SIG{__WARN__} = Slic3r::GUI::warning_catcher($self);
    
    my $model = eval { Slic3r::Model->read_from_file($input_file) };
    Slic3r::GUI::show_error($self, $@) if $@;
    
    if (defined $model) {
        $self->load_model_objects(@{$model->objects});
        $self->statusbar->SetStatusText("Loaded " . basename($input_file));
    }
    
    $process_dialog->Destroy;
}

sub load_model_objects {
    my ($self, @model_objects) = @_;
    
    my $bed_centerf = $self->bed_centerf;
    
    my $need_arrange = 0;
    my @obj_idx = ();
    foreach my $model_object (@model_objects) {
        my $o = $self->{model}->add_object($model_object);
        
        push @{ $self->{objects} }, Slic3r::GUI::Plater::Object->new(
            name => basename($model_object->input_file),
        );
        push @obj_idx, $#{ $self->{objects} };
    
        if ($model_object->instances_count == 0) {
            # if object has no defined position(s) we need to rearrange everything after loading
            $need_arrange = 1;
        
            # add a default instance and center object around origin
            $o->center_around_origin;  # also aligns object to Z = 0
            $o->add_instance(offset => $bed_centerf);
        }
    
        $self->{print}->auto_assign_extruders($o);
        $self->{print}->add_model_object($o);
    }
    
    # if user turned autocentering off, automatic arranging would disappoint them
    if (!$Slic3r::GUI::Settings->{_}{autocenter}) {
        $need_arrange = 0;
    }
    
    $self->objects_loaded(\@obj_idx, no_arrange => !$need_arrange);
}

sub objects_loaded {
    my $self = shift;
    my ($obj_idxs, %params) = @_;
    
    foreach my $obj_idx (@$obj_idxs) {
        my $object = $self->{objects}[$obj_idx];
        my $model_object = $self->{model}->objects->[$obj_idx];
        $self->{list}->InsertStringItem($obj_idx, $object->name);
        $self->{list}->SetItemFont($obj_idx, Wx::Font->new(10, wxDEFAULT, wxNORMAL, wxNORMAL))
            if $self->{list}->can('SetItemFont');  # legacy code for wxPerl < 0.9918 not supporting SetItemFont()
    
        $self->{list}->SetItem($obj_idx, 1, $model_object->instances_count);
        $self->{list}->SetItem($obj_idx, 2, ($model_object->instances->[0]->scaling_factor * 100) . "%");
    
        $self->make_thumbnail($obj_idx);
    }
    $self->arrange unless $params{no_arrange};
    $self->update;
    
    # zoom to objects
    $self->{canvas3D}->zoom_to_volumes
        if $self->{canvas3D};
    
    $self->{list}->Update;
    $self->{list}->Select($obj_idxs->[-1], 1);
    $self->object_list_changed;
    
    $self->schedule_background_process;
}

sub bed_centerf {
    my ($self) = @_;
    
    my $bed_shape = Slic3r::Polygon->new_scale(@{$self->{config}->bed_shape});
    my $bed_center = $bed_shape->bounding_box->center;
    return Slic3r::Pointf->new(unscale($bed_center->x), unscale($bed_center->y)); #)
}

sub remove {
    my $self = shift;
    my ($obj_idx) = @_;
    
    $self->stop_background_process;
    
    # Prevent toolpaths preview from rendering while we modify the Print object
    $self->{toolpaths2D}->enabled(0) if $self->{toolpaths2D};
    
    # if no object index is supplied, remove the selected one
    if (!defined $obj_idx) {
        ($obj_idx, undef) = $self->selected_object;
    }
    
    splice @{$self->{objects}}, $obj_idx, 1;
    $self->{model}->delete_object($obj_idx);
    $self->{print}->delete_object($obj_idx);
    $self->{list}->DeleteItem($obj_idx);
    $self->object_list_changed;
    
    $self->select_object(undef);
    $self->update;
    $self->schedule_background_process;
}

sub reset {
    my $self = shift;
    
    $self->stop_background_process;
    
    # Prevent toolpaths preview from rendering while we modify the Print object
    $self->{toolpaths2D}->enabled(0) if $self->{toolpaths2D};
    
    @{$self->{objects}} = ();
    $self->{model}->clear_objects;
    $self->{print}->clear_objects;
    $self->{list}->DeleteAllItems;
    $self->object_list_changed;
    
    $self->select_object(undef);
    $self->update;
}

sub increase {
    my $self = shift;
    
    my ($obj_idx, $object) = $self->selected_object;
    my $model_object = $self->{model}->objects->[$obj_idx];
    my $last_instance = $model_object->instances->[-1];
    my $i = $model_object->add_instance(
        offset          => Slic3r::Pointf->new(map 10+$_, @{$last_instance->offset}),
        scaling_factor  => $last_instance->scaling_factor,
        rotation        => $last_instance->rotation,
    );
    $self->{print}->objects->[$obj_idx]->add_copy($i->offset);
    $self->{list}->SetItem($obj_idx, 1, $model_object->instances_count);
    
    # only autoarrange if user has autocentering enabled
    $self->stop_background_process;
    if ($Slic3r::GUI::Settings->{_}{autocenter}) {
        $self->arrange;
    } else {
        $self->update;
    }
    $self->schedule_background_process;
}

sub decrease {
    my $self = shift;
    
    $self->stop_background_process;
    
    my ($obj_idx, $object) = $self->selected_object;
    my $model_object = $self->{model}->objects->[$obj_idx];
    if ($model_object->instances_count >= 2) {
        $model_object->delete_last_instance;
        $self->{print}->objects->[$obj_idx]->delete_last_copy;
        $self->{list}->SetItem($obj_idx, 1, $model_object->instances_count);
    } else {
        $self->remove;
    }
    
    if ($self->{objects}[$obj_idx]) {
        $self->{list}->Select($obj_idx, 0);
        $self->{list}->Select($obj_idx, 1);
    }
    $self->update;
    $self->schedule_background_process;
}

sub rotate {
    my $self = shift;
    my ($angle, $axis) = @_;
    
    $axis //= Z;
    
    my ($obj_idx, $object) = $self->selected_object;
    return if !defined $obj_idx;
    
    my $model_object = $self->{model}->objects->[$obj_idx];
    my $model_instance = $model_object->instances->[0];
    
    # we need thumbnail to be computed before allowing rotation
    return if !$object->thumbnail;
    
    if (!defined $angle) {
        my $axis_name = $axis == X ? 'X' : $axis == Y ? 'Y' : 'Z';
        $angle = Wx::GetNumberFromUser("", "Enter the rotation angle:", "Rotate around $axis_name axis", $model_instance->rotation, -364, 364, $self);
        return if !$angle || $angle == -1;
        $angle = 0 - $angle;  # rotate clockwise (be consistent with button icon)
    }
    
    $self->stop_background_process;
    
    if ($axis == Z) {
        my $new_angle = $model_instance->rotation + $angle;
        $_->set_rotation($new_angle) for @{ $model_object->instances };
        $object->transform_thumbnail($self->{model}, $obj_idx);
    } else {
        # rotation around X and Y needs to be performed on mesh
        # so we first apply any Z rotation
        if ($model_instance->rotation != 0) {
            $model_object->rotate(deg2rad($model_instance->rotation), Z);
            $_->set_rotation(0) for @{ $model_object->instances };
        }
        $model_object->rotate(deg2rad($angle), $axis);
        $self->make_thumbnail($obj_idx);
    }
    
    $model_object->update_bounding_box;
    # update print and start background processing
    $self->{print}->add_model_object($model_object, $obj_idx);
    
    $self->selection_changed;  # refresh info (size etc.)
    $self->update;
    $self->schedule_background_process;
}

sub flip {
    my ($self, $axis) = @_;
    
    my ($obj_idx, $object) = $self->selected_object;
    return if !defined $obj_idx;
    
    my $model_object = $self->{model}->objects->[$obj_idx];
    my $model_instance = $model_object->instances->[0];
    
    # apply Z rotation before flipping
    if ($model_instance->rotation != 0) {
        $model_object->rotate(deg2rad($model_instance->rotation), Z);
        $_->set_rotation(0) for @{ $model_object->instances };
    }
    
    $model_object->flip($axis);
    $model_object->update_bounding_box;
    $self->make_thumbnail($obj_idx);
        
    # update print and start background processing
    $self->stop_background_process;
    $self->{print}->add_model_object($model_object, $obj_idx);
    
    $self->selection_changed;  # refresh info (size etc.)
    $self->update;
    $self->schedule_background_process;
}

sub changescale {
    my ($self, $axis) = @_;
    
    my ($obj_idx, $object) = $self->selected_object;
    return if !defined $obj_idx;
    
    my $model_object = $self->{model}->objects->[$obj_idx];
    my $model_instance = $model_object->instances->[0];
    
    # we need thumbnail to be computed before allowing scaling
    return if !$object->thumbnail;
    
    if (defined $axis) {
        my $axis_name = $axis == X ? 'X' : $axis == Y ? 'Y' : 'Z';
        my $scale = Wx::GetNumberFromUser("", "Enter the scale % for the selected object:", "Scale along $axis_name", 100, 0, 100000, $self);
        return if !$scale || $scale < 0;
        
        # apply Z rotation before scaling
        if ($model_instance->rotation != 0) {
            $model_object->rotate(deg2rad($model_instance->rotation), Z);
            $_->set_rotation(0) for @{ $model_object->instances };
        }
        
        my $versor = [1,1,1];
        $versor->[$axis] = $scale/100;
        $model_object->scale_xyz(Slic3r::Pointf3->new(@$versor));
        $self->make_thumbnail($obj_idx);
    } else {
        # max scale factor should be above 2540 to allow importing files exported in inches
        my $scale = Wx::GetNumberFromUser("", "Enter the scale % for the selected object:", 'Scale', $model_instance->scaling_factor*100, 0, 100000, $self);
        return if !$scale || $scale < 0;
    
        $self->{list}->SetItem($obj_idx, 2, "$scale%");
        $scale /= 100;  # turn percent into factor
        
        my $variation = $scale / $model_instance->scaling_factor;
        foreach my $range (@{ $model_object->layer_height_ranges }) {
            $range->[0] *= $variation;
            $range->[1] *= $variation;
        }
        $_->set_scaling_factor($scale) for @{ $model_object->instances };
        $object->transform_thumbnail($self->{model}, $obj_idx);
    }
    $model_object->update_bounding_box;
    
    # update print and start background processing
    $self->stop_background_process;
    $self->{print}->add_model_object($model_object, $obj_idx);
    
    $self->selection_changed(1);  # refresh info (size, volume etc.)
    $self->update;
    $self->schedule_background_process;
}

sub arrange {
    my $self = shift;
    
    $self->pause_background_process;
    
    my $bb = Slic3r::Geometry::BoundingBoxf->new_from_points($self->{config}->bed_shape);
    eval {
        $self->{model}->arrange_objects($self->GetFrame->config->min_object_distance, $bb);
    };
    # ignore arrange failures on purpose: user has visual feedback and we don't need to warn him
    # when parts don't fit in print bed
    
    $self->update(1);
}

sub split_object {
    my $self = shift;
    
    my ($obj_idx, $current_object)  = $self->selected_object;
    
    # we clone model object because split_object() adds the split volumes
    # into the same model object, thus causing duplicates when we call load_model_objects()
    my $new_model = $self->{model}->clone;  # store this before calling get_object()
    my $current_model_object = $new_model->get_object($obj_idx);
    
    if ($current_model_object->volumes_count > 1) {
        Slic3r::GUI::warning_catcher($self)->("The selected object can't be split because it contains more than one volume/material.");
        return;
    }
    
    $self->pause_background_process;
    
    my @model_objects = @{$current_model_object->split_object};
    if (@model_objects == 1) {
        $self->resume_background_process;
        Slic3r::GUI::warning_catcher($self)->("The selected object couldn't be split because it contains only one part.");
        $self->resume_background_process;
        return;
    }
    
    foreach my $object (@model_objects) {
        $object->instances->[$_]->offset->translate($_ * 10, $_ * 10)
            for 1..$#{ $object->instances };
        
        # we need to center this single object around origin
        $object->center_around_origin;
    }

    # remove the original object before spawning the object_loaded event, otherwise 
    # we'll pass the wrong $obj_idx to it (which won't be recognized after the
    # thumbnail thread returns)
    $self->remove($obj_idx);
    $current_object = $obj_idx = undef;
    
    # load all model objects at once, otherwise the plate would be rearranged after each one
    # causing original positions not to be kept
    $self->load_model_objects(@model_objects);
}

sub schedule_background_process {
    my ($self) = @_;
    
    if (defined $self->{apply_config_timer}) {
        $self->{apply_config_timer}->Start(PROCESS_DELAY, 1);  # 1 = one shot
        $self->{toolpaths2D}->reload_print;
    }
}

sub async_apply_config {
    my ($self) = @_;
    
    # pause process thread before applying new config
    # since we don't want to touch data that is being used by the threads
    $self->pause_background_process;
    
    # apply new config
    my $invalidated = $self->{print}->apply_config($self->GetFrame->config);
    
    return if !$Slic3r::GUI::Settings->{_}{background_processing};
    
    if ($invalidated) {
        # kill current thread if any
        $self->stop_background_process;
    } else {
        $self->resume_background_process;
    }
    
    # schedule a new process thread in case it wasn't running
    $self->start_background_process;
}

sub start_background_process {
    my ($self) = @_;
    
    return if !$Slic3r::have_threads;
    return if !@{$self->{objects}};
    return if $self->{process_thread};
    
    # It looks like declaring a local $SIG{__WARN__} prevents the ugly
    # "Attempt to free unreferenced scalar" warning...
    local $SIG{__WARN__} = Slic3r::GUI::warning_catcher($self);
    
    # don't start process thread if config is not valid
    eval {
        # this will throw errors if config is not valid
        $self->GetFrame->config->validate;
        $self->{print}->validate;
    };
    if ($@) {
        $self->statusbar->SetStatusText($@);
        return;
    }
    
    # apply extra variables
    {
        my $extra = $self->GetFrame->extra_variables;
        $self->{print}->placeholder_parser->set($_, $extra->{$_}) for keys %$extra;
    }
    
    # start thread
    @_ = ();
    $self->{process_thread} = Slic3r::spawn_thread(sub {
        eval {
            $self->{print}->process;
        };
        if ($@) {
            Slic3r::debugf "Discarding background process error: $@\n";
            Wx::PostEvent($self, Wx::PlThreadEvent->new(-1, $PROCESS_COMPLETED_EVENT, $@));
        } else {
            Wx::PostEvent($self, Wx::PlThreadEvent->new(-1, $PROCESS_COMPLETED_EVENT, undef));
        }
        Slic3r::thread_cleanup();
    });
    Slic3r::debugf "Background processing started.\n";
}

sub stop_background_process {
    my ($self) = @_;
    
    $self->{apply_config_timer}->Stop if defined $self->{apply_config_timer};
    $self->statusbar->SetCancelCallback(undef);
    $self->statusbar->StopBusy;
    $self->statusbar->SetStatusText("");
    $self->{toolpaths2D}->reload_print;
    
    if ($self->{process_thread}) {
        Slic3r::debugf "Killing background process.\n";
        Slic3r::kill_all_threads();
        $self->{process_thread} = undef;
    } else {
        Slic3r::debugf "No background process running.\n";
    }
    
    # if there's an export process, kill that one as well
    if ($self->{export_thread}) {
        Slic3r::debugf "Killing background export process.\n";
        Slic3r::kill_all_threads();
        $self->{export_thread} = undef;
    }
}

sub pause_background_process {
    my ($self) = @_;
    
    if ($self->{process_thread} || $self->{export_thread}) {
        Slic3r::pause_all_threads();
    } elsif (defined $self->{apply_config_timer} && $self->{apply_config_timer}->IsRunning) {
        $self->{apply_config_timer}->Stop;
    }
}

sub resume_background_process {
    my ($self) = @_;
    
    if ($self->{process_thread} || $self->{export_thread}) {
        Slic3r::resume_all_threads();
    }
}

sub export_gcode {
    my ($self, $output_file) = @_;
    
    return if !@{$self->{objects}};
    
    if ($self->{export_gcode_output_file}) {
        Wx::MessageDialog->new($self, "Another export job is currently running.", 'Error', wxOK | wxICON_ERROR)->ShowModal;
        return;
    }
    
    # if process is not running, validate config
    # (we assume that if it is running, config is valid)
    eval {
        # this will throw errors if config is not valid
        $self->GetFrame->config->validate;
        $self->{print}->validate;
    };
    Slic3r::GUI::catch_error($self) and return;
    
    
    # apply config and validate print
    my $config = $self->GetFrame->config;
    eval {
        # this will throw errors if config is not valid
        $config->validate;
        $self->{print}->apply_config($config);
        $self->{print}->validate;
    };
    if (!$Slic3r::have_threads) {
        Slic3r::GUI::catch_error($self) and return;
    }
    
    # select output file
    if ($output_file) {
        $self->{export_gcode_output_file} = $self->{print}->expanded_output_filepath($output_file);
    } else {
        my $default_output_file = $self->{print}->expanded_output_filepath($main::opt{output});
        my $dlg = Wx::FileDialog->new($self, 'Save G-code file as:', wxTheApp->output_path(dirname($default_output_file)),
            basename($default_output_file), &Slic3r::GUI::FILE_WILDCARDS->{gcode}, wxFD_SAVE);
        if ($dlg->ShowModal != wxID_OK) {
            $dlg->Destroy;
            return;
        }
        $Slic3r::GUI::Settings->{_}{last_output_path} = dirname($dlg->GetPath);
        wxTheApp->save_settings;
        $self->{export_gcode_output_file} = $Slic3r::GUI::MainFrame::last_output_file = $dlg->GetPath;
        $dlg->Destroy;
    }
    
    $self->statusbar->StartBusy;
    
    if ($Slic3r::have_threads) {
        $self->statusbar->SetCancelCallback(sub {
            $self->stop_background_process;
            $self->statusbar->SetStatusText("Export cancelled");
        });
        
        # start background process, whose completion event handler
        # will detect $self->{export_gcode_output_file} and proceed with export
        $self->start_background_process;
    } else {
        eval {
            $self->{print}->process;
            $self->{print}->export_gcode(output_file => $self->{export_gcode_output_file});
        };
        my $result = !Slic3r::GUI::catch_error($self);
        $self->on_export_completed($result);
    }
    
    # this updates buttons status
    $self->object_list_changed;
    
    return $self->{export_gcode_output_file};
}

# This gets called only if we have threads.
sub on_process_completed {
    my ($self, $error) = @_;
    
    $self->statusbar->SetCancelCallback(undef);
    $self->statusbar->StopBusy;
    $self->statusbar->SetStatusText($error // "");
    
    Slic3r::debugf "Background processing completed.\n";
    $self->{process_thread}->detach if $self->{process_thread};
    $self->{process_thread} = undef;
    
    return if $error;
    $self->{toolpaths2D}->reload_print;
    
    # if we have an export filename, start a new thread for exporting G-code
    if ($self->{export_gcode_output_file}) {
        @_ = ();
        
        # workaround for "Attempt to free un referenced scalar..."
        our $_thread_self = $self;
        
        $self->{export_thread} = Slic3r::spawn_thread(sub {
            eval {
                $_thread_self->{print}->export_gcode(output_file => $_thread_self->{export_gcode_output_file});
            };
            if ($@) {
                Wx::PostEvent($_thread_self, Wx::PlThreadEvent->new(-1, $ERROR_EVENT, shared_clone([ $@ ])));
                Wx::PostEvent($_thread_self, Wx::PlThreadEvent->new(-1, $EXPORT_COMPLETED_EVENT, 0));
            } else {
                Wx::PostEvent($_thread_self, Wx::PlThreadEvent->new(-1, $EXPORT_COMPLETED_EVENT, 1));
            }
            Slic3r::thread_cleanup();
        });
        Slic3r::debugf "Background G-code export started.\n";
    }
}

# This gets called also if we have no threads.
sub on_progress_event {
    my ($self, $percent, $message) = @_;
    
    $self->statusbar->SetProgress($percent);
    $self->statusbar->SetStatusText("$message…");
}

# This gets called also if we don't have threads.
sub on_export_completed {
    my ($self, $result) = @_;
    
    $self->statusbar->SetCancelCallback(undef);
    $self->statusbar->StopBusy;
    $self->statusbar->SetStatusText("");
    
    Slic3r::debugf "Background export process completed.\n";
    $self->{export_thread}->detach if $self->{export_thread};
    $self->{export_thread} = undef;
    
    my $message;
    my $send_gcode = 0;
    if ($result) {
        if ($self->{send_gcode_file}) {
            $message = "Sending G-code file to the OctoPrint server...";
            $send_gcode = 1;
        } else {
            $message = "G-code file exported to " . $self->{export_gcode_output_file};
        }
    } else {
        $message = "Export failed";
    }
    $self->{export_gcode_output_file} = undef;
    $self->statusbar->SetStatusText($message);
    wxTheApp->notify($message);
    
    $self->send_gcode if $send_gcode;
    $self->{send_gcode_file} = undef;
    
    # this updates buttons status
    $self->object_list_changed;
}

sub send_gcode {
    my ($self) = @_;
    
    $self->statusbar->StartBusy;
    
    my $ua = LWP::UserAgent->new;
    $ua->timeout(180);
    
    my $res = $ua->post(
        "http://" . $self->{config}->octoprint_host . "/api/files/local",
        Content_Type => 'form-data',
        'X-Api-Key' => $self->{config}->octoprint_apikey,
        Content => [
            # OctoPrint doesn't like Windows paths
            file => [ $self->{send_gcode_file}, basename($self->{send_gcode_file}) ],
        ],
    );
    
    $self->statusbar->StopBusy;
    
    if ($res->is_success) {
        $self->statusbar->SetStatusText("G-code file successfully uploaded to the OctoPrint server");
    } else {
        my $message = "Error while uploading to the OctoPrint server: " . $res->status_line;
        Slic3r::GUI::show_error($self, $message);
        $self->statusbar->SetStatusText($message);
    }
}

sub export_stl {
    my $self = shift;
    
    return if !@{$self->{objects}};
        
    my $output_file = $self->_get_export_file('STL') or return;
    Slic3r::Format::STL->write_file($output_file, $self->{model}, binary => 1);
    $self->statusbar->SetStatusText("STL file exported to $output_file");
    
    # this method gets executed in a separate thread by wxWidgets since it's a button handler
    Slic3r::thread_cleanup() if $Slic3r::have_threads;
}

sub export_object_stl {
    my $self = shift;
    
    my ($obj_idx, $object) = $self->selected_object;
    return if !defined $obj_idx;
    
    my $model_object = $self->{model}->objects->[$obj_idx];
        
    my $output_file = $self->_get_export_file('STL') or return;
    Slic3r::Format::STL->write_file($output_file, $model_object->mesh, binary => 1);
    $self->statusbar->SetStatusText("STL file exported to $output_file");
}

sub export_amf {
    my $self = shift;
    
    return if !@{$self->{objects}};
        
    my $output_file = $self->_get_export_file('AMF') or return;
    Slic3r::Format::AMF->write_file($output_file, $self->{model});
    $self->statusbar->SetStatusText("AMF file exported to $output_file");
    
    # this method gets executed in a separate thread by wxWidgets since it's a menu handler
    Slic3r::thread_cleanup() if $Slic3r::have_threads;
}

sub _get_export_file {
    my $self = shift;
    my ($format) = @_;
    
    my $suffix = $format eq 'STL' ? '.stl' : '.amf.xml';
    
    my $output_file = $main::opt{output};
    {
        $output_file = $self->{print}->expanded_output_filepath($output_file);
        $output_file =~ s/\.gcode$/$suffix/i;
        my $dlg = Wx::FileDialog->new($self, "Save $format file as:", dirname($output_file),
            basename($output_file), &Slic3r::GUI::MODEL_WILDCARD, wxFD_SAVE | wxFD_OVERWRITE_PROMPT);
        if ($dlg->ShowModal != wxID_OK) {
            $dlg->Destroy;
            return undef;
        }
        $output_file = $Slic3r::GUI::MainFrame::last_output_file = $dlg->GetPath;
        $dlg->Destroy;
    }
    return $output_file;
}

sub make_thumbnail {
    my $self = shift;
    my ($obj_idx) = @_;
    
    my $plater_object = $self->{objects}[$obj_idx];
    $plater_object->thumbnail(Slic3r::ExPolygon::Collection->new);
    my $cb = sub {
        $plater_object->make_thumbnail($self->{model}, $obj_idx);
        
        if ($Slic3r::have_threads) {
            Wx::PostEvent($self, Wx::PlThreadEvent->new(-1, $THUMBNAIL_DONE_EVENT, shared_clone([ $obj_idx ])));
            Slic3r::thread_cleanup();
            threads->exit;
        } else {
            $self->on_thumbnail_made($obj_idx);
        }
    };
    
    @_ = ();
    $Slic3r::have_threads
        ? threads->create(sub { $cb->(); Slic3r::thread_cleanup(); })->detach
        : $cb->();
}

sub on_thumbnail_made {
    my $self = shift;
    my ($obj_idx) = @_;
    
    $self->{objects}[$obj_idx]->transform_thumbnail($self->{model}, $obj_idx);
    $self->refresh_canvases;
}

# this method gets called whenever print center is changed or the objects' bounding box changes
# (i.e. when an object is added/removed/moved/rotated/scaled)
sub update {
    my ($self, $force_autocenter) = @_;
    
    if ($Slic3r::GUI::Settings->{_}{autocenter} || $force_autocenter) {
        $self->{model}->center_instances_around_point($self->bed_centerf);
    }
    
    $self->pause_background_process;
    my $invalidated = $self->{print}->reload_model_instances();
    if ($invalidated) {
        $self->schedule_background_process;
    } else {
        $self->resume_background_process;
    }
    
    $self->refresh_canvases;
}

sub on_model_instances_changed {
    my ($self) = @_;
    
    
}

sub on_extruders_change {
    my ($self, $num_extruders) = @_;
    
    my $choices = $self->{preset_choosers}{filament};
    while (@$choices < $num_extruders) {
        my @presets = $choices->[0]->GetStrings;
        push @$choices, Wx::Choice->new($self, -1, wxDefaultPosition, [150, -1], [@presets]);
        $choices->[-1]->SetFont($Slic3r::GUI::small_font);
        $self->{presets_sizer}->Insert(4 + ($#$choices-1)*2, 0, 0);
        $self->{presets_sizer}->Insert(5 + ($#$choices-1)*2, $choices->[-1], 0, wxEXPAND | wxBOTTOM, FILAMENT_CHOOSERS_SPACING);
        EVT_CHOICE($choices->[-1], $choices->[-1], sub { $self->_on_select_preset('filament', @_) });
        my $i = first { $choices->[-1]->GetString($_) eq ($Slic3r::GUI::Settings->{presets}{"filament_" . $#$choices} || '') } 0 .. $#presets;
        $choices->[-1]->SetSelection($i || 0);
    }
    while (@$choices > $num_extruders) {
        $self->{presets_sizer}->Remove(4 + ($#$choices-1)*2);  # label
        $self->{presets_sizer}->Remove(4 + ($#$choices-1)*2);  # wxChoice
        $choices->[-1]->Destroy;
        pop @$choices;
    }
    $self->Layout;
}

sub on_config_change {
    my $self = shift;
    my ($config) = @_;
    
    foreach my $opt_key (@{$self->{config}->diff($config)}) {
        $self->{config}->set($opt_key, $config->get($opt_key));
        if ($opt_key eq 'bed_shape') {
            $self->{canvas}->update_bed_size;
            $self->{canvas3D}->update_bed_size if $self->{canvas3D};
            $self->update;
        } elsif ($opt_key eq 'octoprint_host') {
            if ($config->get('octoprint_host')) {
                $self->{btn_send_gcode}->Show;
            } else {
                $self->{btn_send_gcode}->Hide;
            }
            $self->Layout;
        }
    }
    
    return if !$self->GetFrame->is_loaded;
    
    # (re)start timer
    $self->schedule_background_process;
}

sub list_item_deselected {
    my ($self, $event) = @_;
    return if $PreventListEvents;
    
    if ($self->{list}->GetFirstSelected == -1) {
        $self->select_object(undef);
        $self->refresh_canvases;
    }
}

sub list_item_selected {
    my ($self, $event) = @_;
    return if $PreventListEvents;
    
    my $obj_idx = $event->GetIndex;
    $self->select_object($obj_idx);
    $self->refresh_canvases;
}

sub list_item_activated {
    my ($self, $event, $obj_idx) = @_;
    
    $obj_idx //= $event->GetIndex;
	$self->object_cut_dialog($obj_idx);
}

sub object_cut_dialog {
    my $self = shift;
    my ($obj_idx) = @_;
    
    if (!defined $obj_idx) {
        ($obj_idx, undef) = $self->selected_object;
    }
    
    if (!$Slic3r::GUI::have_OpenGL) {
        Slic3r::GUI::show_error($self, "Please install the OpenGL modules to use this feature (see build instructions).");
        return;
    }
    
    my $dlg = Slic3r::GUI::Plater::ObjectCutDialog->new($self,
		object              => $self->{objects}[$obj_idx],
		model_object        => $self->{model}->objects->[$obj_idx],
	);
	$dlg->ShowModal;
	
	if (my @new_objects = $dlg->NewModelObjects) {
	    $self->remove($obj_idx);
	    $self->load_model_objects(grep defined($_), @new_objects);
	    $self->arrange;
	}
}

sub object_settings_dialog {
    my $self = shift;
    my ($obj_idx) = @_;
    
    if (!defined $obj_idx) {
        ($obj_idx, undef) = $self->selected_object;
    }
    my $model_object = $self->{model}->objects->[$obj_idx];
    
    # validate config before opening the settings dialog because
    # that dialog can't be closed if validation fails, but user
    # can't fix any error which is outside that dialog
    return unless $self->validate_config;
    
    my $dlg = Slic3r::GUI::Plater::ObjectSettingsDialog->new($self,
		object          => $self->{objects}[$obj_idx],
		model_object    => $model_object,
	);
	$self->pause_background_process;
	$dlg->ShowModal;
	
    # update thumbnail since parts may have changed
    if ($dlg->PartsChanged) {
	    # recenter and re-align to Z = 0
	    $model_object->center_around_origin;
        $self->make_thumbnail($obj_idx);
    }
	
	# update print
	if ($dlg->PartsChanged || $dlg->PartSettingsChanged) {
	    $self->stop_background_process;
        $self->{print}->reload_object($obj_idx);
        $self->schedule_background_process;
    } else {
        $self->resume_background_process;
    }
}

sub object_list_changed {
    my $self = shift;
    
    my $have_objects = @{$self->{objects}} ? 1 : 0;
    my $method = $have_objects ? 'Enable' : 'Disable';
    $self->{"btn_$_"}->$method
        for grep $self->{"btn_$_"}, qw(reset arrange export_gcode export_stl send_gcode);
    
    if ($self->{export_gcode_output_file} || $self->{send_gcode_file}) {
        $self->{btn_export_gcode}->Disable;
        $self->{btn_send_gcode}->Disable;
    }
    
    if ($self->{htoolbar}) {
        $self->{htoolbar}->EnableTool($_, $have_objects)
            for (TB_RESET, TB_ARRANGE);
    }
}

sub selection_changed {
    my $self = shift;
    
    my ($obj_idx, $object) = $self->selected_object;
    my $have_sel = defined $obj_idx;
    
    my $method = $have_sel ? 'Enable' : 'Disable';
    $self->{"btn_$_"}->$method
        for grep $self->{"btn_$_"}, qw(remove increase decrease rotate45cw rotate45ccw changescale split cut settings);
    
    if ($self->{htoolbar}) {
        $self->{htoolbar}->EnableTool($_, $have_sel)
            for (TB_REMOVE, TB_MORE, TB_FEWER, TB_45CW, TB_45CCW, TB_SCALE, TB_SPLIT, TB_CUT, TB_SETTINGS);
    }
    
    if ($self->{object_info_size}) { # have we already loaded the info pane?
        if ($have_sel) {
            my $model_object = $self->{model}->objects->[$obj_idx];
            my $model_instance = $model_object->instances->[0];
            $self->{object_info_size}->SetLabel(sprintf("%.2f x %.2f x %.2f", @{$model_object->instance_bounding_box(0)->size}));
            $self->{object_info_materials}->SetLabel($model_object->materials_count);
            
            if (my $stats = $model_object->mesh_stats) {
                $self->{object_info_volume}->SetLabel(sprintf('%.2f', $stats->{volume} * ($model_instance->scaling_factor**3)));
                $self->{object_info_facets}->SetLabel(sprintf('%d (%d shells)', $model_object->facets_count, $stats->{number_of_parts}));
                if (my $errors = sum(@$stats{qw(degenerate_facets edges_fixed facets_removed facets_added facets_reversed backwards_edges)})) {
                    $self->{object_info_manifold}->SetLabel(sprintf("Auto-repaired (%d errors)", $errors));
                    $self->{object_info_manifold_warning_icon}->Show;
                    
                    # we don't show normals_fixed because we never provide normals
	                # to admesh, so it generates normals for all facets
                    my $message = sprintf '%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d facets reversed, %d backwards edges',
                        @$stats{qw(degenerate_facets edges_fixed facets_removed facets_added facets_reversed backwards_edges)};
                    $self->{object_info_manifold}->SetToolTipString($message);
                    $self->{object_info_manifold_warning_icon}->SetToolTipString($message);
                } else {
                    $self->{object_info_manifold}->SetLabel("Yes");
                }
            } else {
                $self->{object_info_facets}->SetLabel($object->facets);
            }
        } else {
            $self->{"object_info_$_"}->SetLabel("") for qw(size volume facets materials manifold);
            $self->{object_info_manifold_warning_icon}->Hide;
            $self->{object_info_manifold}->SetToolTipString("");
        }
        $self->Layout;
    }
    
    # prepagate the event to the frame (a custom Wx event would be cleaner)
    $self->GetFrame->on_plater_selection_changed($have_sel);
}

sub select_object {
    my ($self, $obj_idx) = @_;
    
    $_->selected(0) for @{ $self->{objects} };
    if (defined $obj_idx) {
        $self->{objects}->[$obj_idx]->selected(1);
        
        # We use this flag to avoid circular event handling
        # Select() happens to fire a wxEVT_LIST_ITEM_SELECTED on Windows, 
        # whose event handler calls this method again and again and again
        $PreventListEvents = 1;
        $self->{list}->Select($obj_idx, 1);
        $PreventListEvents = 0;
    } else {
        # TODO: deselect all in list
    }
    $self->selection_changed(1);
}

sub selected_object {
    my $self = shift;
    
    my $obj_idx = first { $self->{objects}[$_]->selected } 0..$#{ $self->{objects} };
    return undef if !defined $obj_idx;
    return ($obj_idx, $self->{objects}[$obj_idx]),
}

sub refresh_canvases {
    my ($self) = @_;
    
    $self->{canvas}->Refresh;
    $self->{canvas3D}->update if $self->{canvas3D};
}

sub validate_config {
    my $self = shift;
    
    eval {
        $self->GetFrame->config->validate;
    };
    return 0 if Slic3r::GUI::catch_error($self);    
    return 1;
}

sub statusbar {
    my $self = shift;
    return $self->GetFrame->{statusbar};
}

sub object_menu {
    my ($self) = @_;
    
    my $frame = $self->GetFrame;
    my $menu = Wx::Menu->new;
    $frame->_append_menu_item($menu, "Delete\tCtrl+Del", 'Remove the selected object', sub {
        $self->remove;
    });
    $frame->_append_menu_item($menu, "Increase copies\tCtrl++", 'Place one more copy of the selected object', sub {
        $self->increase;
    });
    $frame->_append_menu_item($menu, "Decrease copies\tCtrl+-", 'Remove one copy of the selected object', sub {
        $self->decrease;
    });
    $menu->AppendSeparator();
    $frame->_append_menu_item($menu, "Rotate 45° clockwise", 'Rotate the selected object by 45° clockwise', sub {
        $self->rotate(-45);
    });
    $frame->_append_menu_item($menu, "Rotate 45° counter-clockwise", 'Rotate the selected object by 45° counter-clockwise', sub {
        $self->rotate(+45);
    });
    
    my $rotateMenu = Wx::Menu->new;
    $menu->AppendSubMenu($rotateMenu, "Rotate", 'Rotate the selected object by an arbitrary angle');
    $frame->_append_menu_item($rotateMenu, "Around X axis…", 'Rotate the selected object by an arbitrary angle around X axis', sub {
        $self->rotate(undef, X);
    });
    $frame->_append_menu_item($rotateMenu, "Around Y axis…", 'Rotate the selected object by an arbitrary angle around Y axis', sub {
        $self->rotate(undef, Y);
    });
    $frame->_append_menu_item($rotateMenu, "Around Z axis…", 'Rotate the selected object by an arbitrary angle around Z axis', sub {
        $self->rotate(undef, Z);
    });
    
    my $flipMenu = Wx::Menu->new;
    $menu->AppendSubMenu($flipMenu, "Flip", 'Mirror the selected object');
    $frame->_append_menu_item($flipMenu, "Along X axis…", 'Mirror the selected object along the X axis', sub {
        $self->flip(X);
    });
    $frame->_append_menu_item($flipMenu, "Along Y axis…", 'Mirror the selected object along the Y axis', sub {
        $self->flip(Y);
    });
    $frame->_append_menu_item($flipMenu, "Along Z axis…", 'Mirror the selected object along the Z axis', sub {
        $self->flip(Z);
    });
    
    my $scaleMenu = Wx::Menu->new;
    $menu->AppendSubMenu($scaleMenu, "Scale", 'Scale the selected object along a single axis');
    $frame->_append_menu_item($scaleMenu, "Uniformly…", 'Scale the selected object along the XYZ axes', sub {
        $self->changescale(undef);
    });
    $frame->_append_menu_item($scaleMenu, "Along X axis…", 'Scale the selected object along the X axis', sub {
        $self->changescale(X);
    });
    $frame->_append_menu_item($scaleMenu, "Along Y axis…", 'Scale the selected object along the Y axis', sub {
        $self->changescale(Y);
    });
    $frame->_append_menu_item($scaleMenu, "Along Z axis…", 'Scale the selected object along the Z axis', sub {
        $self->changescale(Z);
    });
    
    $frame->_append_menu_item($menu, "Split", 'Split the selected object into individual parts', sub {
        $self->split_object;
    });
    $frame->_append_menu_item($menu, "Cut…", 'Open the 3D cutting tool', sub {
        $self->object_cut_dialog;
    });
    $menu->AppendSeparator();
    $frame->_append_menu_item($menu, "Settings…", 'Open the object editor dialog', sub {
        $self->object_settings_dialog;
    });
    $menu->AppendSeparator();
    $frame->_append_menu_item($menu, "Export object as STL…", 'Export this single object as STL file', sub {
        $self->export_object_stl;
    });
    
    return $menu;
}

package Slic3r::GUI::Plater::DropTarget;
use Wx::DND;
use base 'Wx::FileDropTarget';

sub new {
    my $class = shift;
    my ($window) = @_;
    my $self = $class->SUPER::new;
    $self->{window} = $window;
    return $self;
}

sub OnDropFiles {
    my $self = shift;
    my ($x, $y, $filenames) = @_;
    
    # stop scalars leaking on older perl
    # https://rt.perl.org/rt3/Public/Bug/Display.html?id=70602
    @_ = ();
    
    # only accept STL, OBJ and AMF files
    return 0 if grep !/\.(?:stl|obj|amf(?:\.xml)?)$/i, @$filenames;
    
    $self->{window}->load_file($_) for @$filenames;
}

package Slic3r::GUI::Plater::Object;
use Moo;

use List::Util qw(first);
use Slic3r::Geometry qw(X Y Z MIN MAX deg2rad);

has 'name'                  => (is => 'rw', required => 1);
has 'thumbnail'             => (is => 'rw'); # ExPolygon::Collection in scaled model units with no transforms
has 'transformed_thumbnail' => (is => 'rw');
has 'instance_thumbnails'   => (is => 'ro', default => sub { [] });  # array of ExPolygon::Collection objects, each one representing the actual placed thumbnail of each instance in pixel units
has 'selected'              => (is => 'rw', default => sub { 0 });

sub make_thumbnail {
    my ($self, $model, $obj_idx) = @_;
    
    # make method idempotent
    $self->thumbnail->clear;
    
    my $mesh = $model->objects->[$obj_idx]->raw_mesh;
    if ($mesh->facets_count <= 5000) {
        # remove polygons with area <= 1mm
        my $area_threshold = Slic3r::Geometry::scale 1;
        $self->thumbnail->append(
            grep $_->area >= $area_threshold,
            @{ $mesh->horizontal_projection },   # horizontal_projection returns scaled expolygons
        );
        $self->thumbnail->simplify(0.5);
    } else {
        my $convex_hull = Slic3r::ExPolygon->new($mesh->convex_hull);
        $self->thumbnail->append($convex_hull);
    }
    
    return $self->thumbnail;
}

sub transform_thumbnail {
    my ($self, $model, $obj_idx) = @_;
    
    return unless defined $self->thumbnail;
    
    my $model_object = $model->objects->[$obj_idx];
    my $model_instance = $model_object->instances->[0];
    
    # the order of these transformations MUST be the same everywhere, including
    # in Slic3r::Print->add_model_object()
    my $t = $self->thumbnail->clone;
    $t->rotate(deg2rad($model_instance->rotation), Slic3r::Point->new(0,0));
    $t->scale($model_instance->scaling_factor);
    
    $self->transformed_thumbnail($t);
}

1;
