Mini Bed Plate Assembly Workflow

Tools

Gather tools and components for assembly

Components Required

Bed plate
Belt mount
Bed corners
Wiper mount
M3x12 SHCS
M3x8 BHCS
M3x6 flat head screw
M3 washer
M3 Nyloc nut
M3x8 spacer
Male cable guide connector
Bed wire harness

Tools

2.5 mm Allen driver
2 mm Allen driver
5.5 mm wrench
Plate holder

Are all the tools and components gathered?

Bed corner fastend

All four on, note orientation

Install bed corners

Mount the 4x bed corners to the bed plate using 8x M3x8 BHCS and M3 washers as shown making sure you just secure them finger tight, don't squish the bed corners.

The side of the bed plate with the two recessed holes is the top mounting surface.

Is the plate oriented correctly?

Belt mount and hardware

Bed plate holder

Bed plate in holder

View of belt mount secured from top

Belt mount from back

Add Belt mount

Fasten the belt mount to the bottom of the bed plate using 3x M3x8 BHCS and M3 washers as shown.

You can use the bed plate holder if needed.

Is the belt mount secure?

Wiper mount and hardware

Orientation

Add the wiper mount

Attach the wiper mount to the bed plate using 2x M3x8 BHCS, M3 washers as shown. Make sure you use one washer under the head of the bolt and one washer under the nut.

Note orientation.