Mini X End Motor Assembly Workflow
Tools
Components Required
- X End Motor Mount
- 120mm length Motor
- Pulley
- Limit Switches
- Male Cable Guide Connector
- Female Cable Guide Connector
- M3x12 SHCS
- M3 Washers
- M3x6 Flat Head Screws
- M2x10 SHCS
- M2 Washers
Tools Required
- 1.3 mm Allen driver
- 1.5 mm Allen driver
- 2 mm Allen driver
- 2.5 mm Allen driver
- Are all the tools and components gathered?
First limit switch
First switch attached
Second limit switch
Second switch attached
Third limit switch
Third switch attached
Attach the first limit switch using 2x M2x10 SHCS and M2 washers as shown.
Attach the second limit switch using 2x M2x10 SHCS and M2 washers as shown.
Attach the third limit switch using 2X M2x10 SHCS and M2 washers as shown.
Make sure the switches are oriented correctly by referencing the pictures.
- Are the switches oriented correctly?
